Siemens Hicom 100 E User Manual

Connecting a/b terminals or entrance telephones
Installation
A31003-K16-X001-3-7620
,
07/99
5-18
Hicom 100 E Version 2.1, Service manual
5.13 Connecting a/b terminals or entrance telephones
A maximum of four analogue
standard telephones
with tone dialling (DTMF and/or DP) can
be connected to the motherboard MB. If the SLAS card is fitted, a maximum of sixteen
additionald telephones can be connected.
Other a/b terminals such as fax machines, answering machines or an automatic dialler can be
connected instead of the standard telephones.
Commercially available entrance telephones can also be connected to the MB or SLAS via a
entrance telephone adapter. Do not forget to take the internal extension numbers into account.
If entrance telephones/door openers are connected, a definition must be entered in system
administration. Connection to a/b terminal. Follow the manufacturer’s instructions, see also
Section 10.5.2 and Section 11.3.
Up to 4 entrance telephones can be connected.
The system activates analogue ports only
after
seizure.

Siemens Hicom 100 E Specifications

General

Brand	Siemens
Model	Hicom 100 E
Category	Telephone
Language	English