Station attributes
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-36
Hicom 100 E Version 2.1, Service manual
10.5.4.13 Reference extensions
One class of service is assigned per line for a reference extension, see Section 10.5.4.
Example
: ext. 11 is "outward restricted" at night and is the reference extension for all other
extensions with night-time "outward restriction". Ext. 12 is assigned "unrestricted trunk access"
at night and is the reference extension for all other extensions with "unrestricted trunk access"
at night. Two lines are connected.
Input sequence Meaning Display
A1 4 2
Trunk access at night for ext. 11 on line
1
(select ext. 11–74 directly with "#",
lines 1–32 by scrolling with "+" and "–
")
Ext. 11, line 1: seized
B*
Change input Change for ext. 11:
C2
Enter new data Ext. 11, line 1:
D1
Class of service: outward restricted Ext. 11, line 1: outw.rest.
E<OK>
Confirm input Ext. 11, line 1: outw.rest.
F
+ Scroll to line 2 Ext. 11, line 2: seized
G
* Change input Ext. 11, line 2:
H
1 Class of service: outward restricted Ext. 11, line 2: outw.rest.
J
<OK> Confirm input Ext. 11, line 2: outw.rest.
K
# Select extension Ext.:
L
12 Enter extension 12 Ext.: 12
M
<OK> Confirm input Ext. 12, line 1: seized
N
+ Scroll to 2 Ext. 12, line 2: seized
O
<F8> Return to Start menu System administration
Classes of service <0> to <4> or <0> to <14> can be assigned by entering a value from "0"–
"4" or "0"–"14" under points D or H.
To Next Page
Loading...
Need help?
General