Siemens Hicom 100 E User Manual

Programming expansion module
s
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-83
Programming guide
10.8.3.1 Defining the number of fax options
The number of fax/DDI modules specified as the fax option is to be entered.
Example
: a fax/DDI module is to be programmed as a fax option.
10.8.3.2 Defining the number of DDI options
The number of fax/DDI modules specified as the DDI option is to be entered.
Example
: a fax/DDI module is to be programmed as a DDI option.
10.8.3.3 Defining the number of fax/DDI options
The number of the fax/DDI modules specified as the fax/DDI option is to be entered.
Example
: a fax/DDI module is to be programmed as a fax/DDI option.
Input sequence Meaning Display
A2 4 1
Number of fax options
(any sequence)
Number: 0
B
* Change input Number
C1
Enter number Number: 1
D<OK>
Confirm input Number: 1
E
<F8> Return to Start menu System administration
A fax option can be deleted by entering "0" under point C.
Input sequence Meaning Display
A2 4 2
Number of DDI options Number: 0
B
* Change input Number
C1
Enter number Number: 1
D<OK>
Confirm input Number: 1
E
<F8> Return to Start menu System administration
A DDI option can be deleted by entering "0" under point C.
Input sequence Meaning Display
A2 4 3
Number of fax/DDI options Number: 0
B
* Change input Number
C1
Enter number Number: 1
D<OK>
Confirm input Number: 1
E
<F8> Return to Start menu System administration
A fax/DDI option can be deleted by entering "0" under point C.

Siemens Hicom 100 E Specifications

General

Brand	Siemens
Model	Hicom 100 E
Category	Telephone
Language	English