Step by Step
Display – application module settings
58
"Set Screen Lock Password" register
The field "Confirm" is activated for input.
Enter the information into the fields (entering
characters, seeÆ Page 13).
• Current: This field is only displayed after you have
specified a password for the first time. If you want
to change the password, you have to enter the
current password into this field.
• New: Enter the new password for unlocking the
screen lock (minimum: 8 characters).
• Confirm: Re-enter the new password to confirm.
Use the keys
r and s to move from line to line.
Use the keys
p and q to move the cursor to the left/
right.
Save settings
Click on the softkey in the application bar.
or
t Press the key to save the settings.
Active input field
Settings
Save
Screen Lock Time
Display
Set Screen Lock Password
New:
Confirm:
Save
To Next Page
Loading...
Need help?
General