Siemens Hipath 5000 - Page 110

Factory Default Settings
110
Lost packet thresholds 10
Max jitter threshold 20
Minimum Session Length 20 (2 sec.)
Mobility On
National Dial Prefix
[2]
0
Observation interval 10
Packet Size Auto
QCU home address 0.0.0.0
QDC server 12010
QoS L2/L3 On
QoS Layer 2 Default 0
QoS Layer 2 Voice/Signaling 5
QoS Layer 3 Signaling 26
QoS Layer 3 Voice 46
Report interval 60
SNMP password
 Password Functions
public
SNMP trap ID address 0.0.0.0
SNTP IP address 0.0.0.0
Switch to home expiry timeout 20
Switch to home retry count 3
Switch To Standby Expiry Timeout 20
Switch To Standby Retry Count 3
TC_TEST expiry timeout 20
TC_TEST retry count 3
Terminal IP address 0.0.0.0
Terminal mask 0.0.0.0
VLAN DHCP
VLAN ID 0
Time zone offset +0
WAP mode
[2]
HTTP
WAP server address
[2]
0.0.0.0
WAP server port
[2]
9200
[1] File name is postfixed by a letter a, b, c or d for the various language packages.
[2] Only available for optiPoint 410/420 economy/economy plus/standard/advance.
Function Default Value