Setting Up the Telephone
15
Step by Step
Preparing for Operation
For the optiPoint 410/420 economy/economy plus/
standard/advance, follow the sequence described
below. The sequence for the optiPoint
410 entry is
described from
 Page 17.
optiPoint 410/420 economy/economy plus/
standard/advance
If problems are encountered during the initial startup or
if you have queries on individual specifications, the
following chapters will be of help:
• For specialized information on the administration of
the optiPoint
410/420, see „Alphabetical
Reference“  Page 68.
• For descriptions of different configuration-related
situations, see
„Administration Scenarios“
 Page 102.
• For error messages on the display of the
optiPoint
410/420, see „Error Messages“
 Page 37.
Entering the Administration Area
: Confirm to open the Configuration menu.
o Enter the Administrator password
(default: 123456).
: Confirm.
The startup process sequence describes a
standard case of configuration. Network
configurations that deviate from the standard
case may require additional entries.
01=Configuration? >
To Next Page
Loading...
