Administration
49
Step by Step
Firmware Update
To update the software for your optiPoint
application
module, perform the following steps:
1. Make sure that an FTP server is available, see
 Page 102, and that the relevant firmware file is
stored on the server.
2. Start the web-based management tool, see
 Page 51.
3. Select "Administration" > [password] > "File
Transfer", see
 Page 60.
4. Enter the following parameters:
– FTP server address, see  Page 76
– FTP account name, see  Page 75
– FTP user name, see  Page 76
– DSM file name, see  Page 69
5. Select "DSM Filename" from the field "Action on
submit", see
 Page 68.
6. Click "Submit".
LDAP Configuration
The following prerequisites must be fulfilled to use the
company phone book:
• An LDAP server is available and the server data has
been entered in the web-based management tool,
see
 Page 51.
• For an example of an LDAP template, see
 Page 80.
Firmware cannot be updated if a Java MIDlet is
active (for example, a speed dialing list).
To Next Page
Loading...
