Siemens Hipath 5000 Administration Guide

Setting Up the Telephone
19
Step by Step
Other Settings
All other settings of your optiPoint 410 entry must be
made through the "
web-based management tool"
 Page 51.
Open the "System" page in your browser and enter the
following parameters:
• Gateway address  Page 76
• Participant number  Page 90
• Participant password  Page 90
•System type  Page 91
Confirm your entries and start the telephone:
Press function key 1.
mm Enter the code.
r Complete entry.
After startup, the telephone is silent and you can make
the other settings
 Page 39.
Troubleshooting
If the optiPoint 410 entry does not function after making
the described configuration, the failure can be
attributed to peculiarities of the network environment.
More information on troubleshooting is available in
Section
„Startup Not Successful“  Page 104.

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English