Siemens Hipath 5000 - Optipoint 410 Entry

Setting Up the Telephone
17
Step by Step
optiPoint 410 entry
If problems are encountered during the initial startup or
if you have queries on individual specifications, the
following chapters will be of help:
• For specialized information on the administration of
the optiPoint
410 entry see „Alphabetical
Reference“  Page 68.
• For descriptions of different configuration-related
situations, see
„Administration Scenarios“
 Page 102.
• For error messages on the LEDs of the
optiPoint
410 entry, see „Error Messages“
 Page 42.
Entering the Administration Area
e d g Press the keys simultaneously.
o Enter the Administrator password
(default: 123456).
r Complete entry.
You are now in the Administration Area (all LEDs
flash).
The top two function keys take over the following
functions in this area:
1st function key
Press function key 1 to make settings.
2nd function key
Press function key 2 to view settings.