Siemens Hipath 5000 - Using a Caller List

Step by Step
Administration
48
Set User Language
Proceed as follows to change the user language of your
optiPoint
application module:
Open the "System settings" page  Page 48.
s
Select the "Language" tab.
qc
Select the required language and confirm.
Confirm the query by clicking the "Yes" softkey.
The optiPoint application module is restarted and the
interface is displayed in the changed language.
Select Keypad Assignment
Proceed as follows to change the keypad assignment of
your optiPoint
application module:
Open the "System settings" page  Page 48.
s
Select the "Keypad" tab.
qc
Select the required assignment (QUERTY -
international, QUERTZ - German) and confirm the
selection.
Confirm the query by clicking the "Yes" softkey.
The optiPoint application module is then restarted; the
keys are assigned according to the selected setting.
Ye s
By selecting the "Automatic" setting, the
optiPoint
application module applies the
language setting of the connected phone.
Ye s