Siemens MAMMOMAT Novation DR - Page 35

Siemens AG SPB7-250.815.06.02.02 MAMMOMAT Novation DR
12.05 CS SD 24
Mechanical covers 35
Page 35 of 116
Medical Solutions
4. Fit the rear cover ((4/Fig. 16 / p. 34)) to the stand and fasten it with screws (see
(5/Fig. 16 / p. 34)) and contact washers (see (6/Fig. 16 / p. 34)).
NOTE
Be careful not to damage the cables at the cable outlet!
5. Fit the inner plastic strip (see (7/Fig. 16 / p. 34)) to the front and side covers and fasten
with screws (see (1/Fig. 16 / p. 34)), eight on either side.
6. Press on the outer plastic strip ((8/Fig. 16 / p. 34)).
Stand cap
Fig. 17: Stand cap
1. Place the stand cap on the top of the MAMMOMAT stand (see (2/Fig. 17 / p. 35)).