G command No.
1)
Meaning MD20150
2)
W
3)
STD
4)
SAG MH
COMPCURV 3 Compressor function COMPCURV ON +/- m
COMPCAD 4 Compressor function COMPCAD ON +/- m
COMPSURF 5 COMPSURF EIN compressor function +/- m
4.3.31 G group 31: OEM G commands
G command No.
1)
Meaning MD20150
2)
W
3)
STD
4)
SAG MH
G810 1 OEM G command - m
G811 2 OEM G command - m
G812 3 OEM G command - m
G813 4 OEM G command - m
G814 5 OEM G command - m
G815 6 OEM G command - m
G816 7 OEM G command - m
G817 8 OEM G command - m
G818 9 OEM G command - m
G819 10 OEM G command - m
Two G groups are reserved for the OEM user. This enables the OEM to program functions that can be customized.
4.3.32 G group 32: OEM G commands
G command No.
1)
Meaning MD20150
2)
W
3)
STD
4)
SAG MH
G820 1 OEM G command - m
G821 2 OEM G command - m
G822 3 OEM G command - m
G823 4 OEM G command - m
G824 5 OEM G command - m
G825 6 OEM G command - m
G826 7 OEM G command - m
G827 8 OEM G command - m
G828 9 OEM G command - m
G829 10 OEM G command - m
Two G groups are reserved for the OEM user. This enables the OEM to program functions that can be customized.
Tables
4.3 G commands
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0 1257
To Next Page
Loading...
Need help?
General
