F-3
Appendix F
The System asks you to type the module
and device numbers.
• Type the three-digit module number
and the three-digit device number
(mmm/ddd), including all leading
zeroes.
• Press ENTER.
After entering the module-device, MXL-IQ
checks whether the device is subject to
IEC. If the device is not subject to IEC, or if
IEC is not enabled for the system, an error
messages displays:
DEVICE NOT SUBJECT TO IEC
IEC NOT ENABLED IN CSG-M
If the device is an IEC detector, MXL-IQ
displays and prints the time, date, device,
and custom message of the cleaned
device.
To Next Page
Loading...
