Siemens NXAIR - Page 137

Operating the contactor panel with panel width 435 mm
110-0134.9 / 14 NXAIR / ≤ 40 kA 137
Fig. 239: Moving the contactor truck into the panel
Pushing the contactor truck into the panel
Push the contactor truck at the top into the panel as far it will go.
Lift the ramps (1) at the panel base upwards.
Fig. 240: Pushing the contactor truck at
the top into the panel
Fig. 241: Lifting the ramps
Check whether the contactor truck is correctly placed into the panel by pulling it
backwards.
3
1