Operating the switch-disconnector panel
110-0134.9 / 14 NXAIR / ≤ 40 kA 237
Fig. 419: Removing the fuse-link in
the striker area (upper side)
Fig. 420: Removing the fuse-link on the
opposite side of striker area
(bottom side)
Insert the new fuse-links into the clamps with the striker at the upper side.
The position of the striker is identified with a triangle representing an arrow on the rating
plate of the HV HRC fuse-link.
Fig. 421: HV HRC fuse-link inserted in the
striker area
Fig. 422: HV HRC fuse-link inserted on
the opposite side of striker area
To Next Page
Loading...
