Operation
236/293 Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 802-9081.9
Disconnector panel as of 2000 A: Earthing the feeder
1
Initial situation
2
➭ Push the interrogation lever downwards and
hold it.
3
➭ Push the control gate to the right.
4
➭ Switch the three-position disconnector to
EARTHED position (insert the operating lever
and turn 180° clockwise).
5
➭ Remove the operating lever (the
interrogation lever and the control gate
return to their initial position).
To Next Page
Loading...
