Siemens RX1400 - Page 24

Chapter 1
Introduction
RUGGEDCOM NETCONF
Reference Guide
12 Sample Session: Editing Data
<rpc message-id="1014" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<candidate/>
</target>
<config>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<system-name>Substation Ethernet: Switch 01</system-name>
</admin>
</config>
</edit-config>
</rpc>]]>]]>
• The <edit-config> element indicates that this request is to edit the configuration.
• The <target> element specifies the configuration to be edited. In this example, the <candidate>
configuration is to be edited.
• The <config> element contains the path to the value to be edited.
• The <admin> element specifies that the value to be edited is in the RUGGEDCOM admin namespace. In this
example, the <system-name> value is being edited.
The device responds with the following:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1014">
<ok/>
</rpc-reply>]]>]]>
The edit is applied to the <candidate> configuration.
7. Issue an <rpc> request to validate the candidate configuration:
<rpc message-id="1015" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<validate>
<source>
<candidate/>
</source>
</validate>
</rpc>]]>]]>
• The <validate> element indicates that this request is to validate a specified configuration.
• The <source> element specifies the configuration to be validated. In this example, the <candidate>
configuration is to be validated.
The device responds with the following:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1015">
<ok/>
</rpc-reply>]]>]]>
The candidate configuration is validated and its syntax is found to be correct. Had there been syntax errors,
the device would return a message with <error-type>, <error-tag>, <error-severity>, <error-
path>, <error-info>, and <bad-element> elements to describe and identify the syntax error.
8. Issue an <rpc> request to commit the changes:
<rpc message-id="1016" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<commit/>
</rpc>]]>]]>
The device responds with the following: