Siemens SICAM - Page 90

Table A-7 Parameters Menu Structure - Communication and Device Parameters
COMMUNICATION
PARAMETERS
▶ MODBUS PARAMETER ▶ MODBUS ID
▶ 1 to 247
▶ SAVE
BAUD RATE ▶ 2400 bps to 115 200 bps
▶ SAVE
PARITY ▶ NONE or EVEN or ODD
▶ SAVE
DEVICE PARAME-
TERS
▶ DEVICE LANGUAGE ▶ ENGLISH or DEUTSCH or ESPAÑOL or PORTUGUÉS or
FRANÇAIS
▶ SAVE
DATE AND TIME ▶ DATE SETTINGS
▶ DATE TODAY
▶ 2012 to 2099/1 to 12/1 to 31
▶ SAVE
DATE AND TIME ▶ DATE FORMAT
▶ DD-MM-YYYY or MM-DD-YYYY or YYYY-MM-DD
▶ SAVE
DATE AND TIME ▶ TIME SETTINGS
▶ TIME NOW
▶ 0 to 23/0 to 59/0 to 59
▶ SAVE
DATE AND TIME ▶ TIME FORMAT
▶ NEW TIME FORMAT
▶ 12 HOUR or 24 HOUR
▶ SAVE
VERSION INFORMA-
TION
▶ ACTIVE FIRMWARE VERSION INFORMATION IS
DISPLAYED
SELF TEST ▶ ACTIVATES SELF TEST
PASSWORD PROTEC-
TION
▶ DISABLE OR ENABLE
▶ SAVE
CHANGE PASSWORD ▶ ENTER NEW PASSWORD
i
i
NOTE
The device resets if one of the following parameters is changed:
•
Frequency
•
Neutral-point treatment
•
Baud rate
•
Parity
•
Ground-fault detection I
N
>, when the parameter is changed above or below the threshold of 1 A
•
Ground-current acquisition (calculation/measurement)
Parameterization
A.2 Parameterizing the User Interface
90 SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019