Installation
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
6.8.1.4. Connect to the Camera
From the Factory the camera will be supplied with Wifi disabled and a static IP address on the
Ethernet connection of:
HTTPS://192.168.10.20
Connect to this address using a standard Web Browser (Firefox recommended) from a PC
configured on the same subnet address.
Figure 19 – Device Security Menu
Tick ‘Do not display this warning again’ and then Continue
As indicated by the warning above, at this stage the Browser will indicate a security warning
due to certificates not having yet been configured. It is safe to proceed (this will vary by
Browser but usually consists of selecting a ‘proceed’ option or by confirming a ‘security
exception’)
To Next Page
Loading...
