Product Information Mixed Configuration ET 200SP / ET 200AL
Product Information, 02/2016, A5E33344611-AC
9
You connect the ET 200AL I/O modules via the BusAdapter BA-Send 1×FC using ET-
Connection.
Connection element for ET-Connection bus cable
Image 3-1 BusAdapter BA-Send 1xFC
Screwdriver with 3 to 3.5 mm blade
Use the bus cable for ET-Connection as connecting cable between the BusAdapter BA-Send
1xFC and the ET 200AL I/O modules.
We recommend using the stripping tool for ET-Connection (6ES7194-2KA00-0AA0) with
blade cassette green (6GK1901-1B...). This guarantees fast and safe stripping.
The bus cable for ET-Connection M8, prefabricated on one side with 1 x M8 connector, 4-
pole, shielded, is available in the following lengths:
● Length 2 m: 6ES7194-2LH20-0AC0
● Length 5 m: 6ES7194-2LH50-0AC0
● Length 10 m: 6ES7194-2LN10-0AC0
● Length 15 m: 6ES7194-2LN15-0AB0
To Next Page
Loading...
