Alarms
6.5 Example program for program alarms
Diagnostics
94 Function Manual, 09/2016, A5E03735838-AD
The window below opens.
Figure 6-17 Insert a dynamic parameter (text list)
5. Select the text list "level_textlist" and the tag "max". Confirm your selection by clicking
"OK".
Result: You have created the alarm text for the type alarms.
If the tag "max" (associated value 1) is 0, the alarm text "level too low" is output.
If the tag "max" (associated value 1) is 1, the alarm text "level too high" is output.
You can learn how to create multilingual texts under "Multilingual alarms" in the section
Editing alarms in the alarm editor (Page 78).
To Next Page
Loading...
