6-2
ET 200L Distributed I/O Device
EWA-4NEB 780600902-05
6.1 Standards and Certification
This chapter contains information the following for the modules and compo-
nents of the ET 200L:
S The most important standards complied with by the ET 200L
S The certification of the ET 200L
The ET 200L distributed I/O device meet the requirements and criteria of
IEC 1131, Part 2.
The ET 200L distributed I/O device meet the requirements and criteria of
IEC 61784-1:2002 Ed1 CP 3/1.
Our products fulfill the requirements and safety objectives of the following
EC Directives and comply with the harmonized European standards (EN)
published for stored-program controllers in the official journals of the Euro-
pean Communities:
S 89/336/EEC Electromagnetic Compatibility Directive
S 73/23/EEC Low Voltage Directive (for electrical equipment)
The EC Declarations of Conformity are available to the relevant authorities
at the following address:
Siemens Aktiengesellschaft
Bereich Automatisierungstechnik
A&D AS E 14
Postfach 1963
D-92209 Amberg
The ET 200L has the following PNO certificates:
Product Name Order Number Release PNO Certificate
ET 200L 16 DI DC 24 V 6ES7 131-1BH01-0XB0 1 Z00179
ET 200L 32 DI DC 24 V 6ES7 131-1BL01-0XB0 1 Z00180
ET 200L 16 DO DC 24 V/0.5 A 6ES7 132-1BH00-0XB0 1 Z00181
ET 200L 32 DO DC 24 V/0.5 A 6ES7 132-1BL00-0XB0 1 Z00182
ET 200L 16 DI/16 DO DC 24 V/0.5 A 6ES7 133-1BL01-0XB0 1 Z00183
Introduction
IEC 1131
PROFIBUS DP
CE Marking
PNO
To Next Page
Loading...
