A-5
ET 200L Distributed I/O Device
EWA-4NEB 780600902-05
A.2 Order Numbers for PROFIBUS Accessories
In this section, we have listed the order numbers for PROFIBUS accessories
which you require for the ET 200L.
Further, you will find notes on the different manuals you will require, de-
pending on the PROFIBUS-DP master being used.
Table A-4 lists all the network components for the ET 200L distributed I/O
device which you may require in conjunction with the ET 200L.
Table A-4 Accessories for the ET 200 Distributed I/O Device
Accessories
Order Number
RS 485 repeater, PROFIBUS -DP, IP 20 6ES7972-0AA01-0XA0
PROFIBUS bus terminator (12 MBaud) (not
for interface module IM-SC)
S Anthracite (without programming port) 6ES7972-0BA12-0XA0
S Anthracite (with programming port) 6ES7972-0BB12-0XA0
PROFIBUS bus terminator (1.5 MBaud) 6ES7972-0CA34-0XA0
Bus cable (not for interface module IM-SC)
S Normal 6XV1830-0AH10
S Drum cable 6XV1830-3BH10
S Direct-buried cable 6XV1830-3AH10
Optical link modules for glass fiber-optic
6GK1502-3CB10
cables
6GK 502-4CB10
PROFIBUS drop cable 6ES7901-4BD00-0XA0
Introduction
Network Compo-
nents for
the ET 200
To Next Page
Loading...
Need help?
General
