Siemens SIMATIC ET 200L - Supplementary Terminals for the TB 16 L and TB 32 L; Supplied Versions of the Supplementary Terminals

7-7
ET 200L Distributed I/O Device
EWA-4NEB 780600902-05
7.3 Supplementary Terminals for the TB 16L and TB 32L
The supplementary terminals allow you to upgrade the two-wire termination
of the ET 200L distributed I/O device to a three- or four-wire termination.
Table 7-3 Supplied Versions of the Supplementary Terminals
Channels Tiers Fixing Order Number
1
Screw-type terminal 6ES7193-1FH20-0XA0
16
1
Spring terminal 6ES7193-1FH50-0XA0
16
2
Screw-type terminal 6ES7193-1FH30-0XA0
2
Spring terminal 6ES7193-1FH60-0XA0
1
Screw-type terminal 6ES7193-1FL20-0XA0
32
1
Spring terminal 6ES7193-1FL50-0XA0
32
2
Screw-type terminal 6ES7193-1FL30-0XA0
2
Spring terminal 6ES7193-1FL60-0XA0
With the supplementary terminals, every tier is jumpered internally.
Definition
Versions Sup-
plied
Characteristics
T
erminal Blocks and Supplementary Terminals – Technical Da
ta