Siemens SIMATIC ET 200L - Pinout of the TB 32 L Terminal Block

7-6
ET 200L Distributed I/O Device
EWA-4NEB 780600902-05
Table 7-2 shows the pinout of the TB 32L terminal block.
Table 7-2 Pinout of the TB 32L Terminal Block
Terminal Assignment
Inputs Outputs
1 to 8 I0: Signals .0 to .7 Q0: Signals .0 to .7
9 to 16 I1: Signals .0 to .7 Q1: Signals .0 to .7
17 to 24 I2: Signals .0 to .7 Q2: Signals .0 to .7
25 to 32 I3: Signals .0 to .7 Q3: Signals .0 to .7
33 to 40 I0: Sensor supply Q0: Chassis ground (inter-
nally jumpered)
41 to 48 I1: Sensor supply Q1: Chassis ground (inter-
nally jumpered)
49 to 56 I2: Sensor supply Q2: Chassis ground (inter-
nally jumpered)
57 to 64 I3: Sensor supply Q3: Chassis ground (inter-
nally jumpered)
1L+ Power supply for channel group A (I0 and I1 or Q0 and Q1)
2L+
Power supply for channel group B
3L+
Power supply for channel group B
(I2 and I3 or Q2 and Q3) internally jumpered
4L+
Power supply for electronics, internally jumpered
5L+
Power supply for electronics, internally jumpered
1M
2M
Chassis ground connection for channel group A, channel
3M
Chassis ground connection for channel group A, channel
group B, and electronics (all internally jumpered)
4M
group B, and electronics (all internally jumpered)
5M
PE
Dimensions and Weight
Dimensions WHD (mm) 191 10040.5
Height with electronics block from top
edge rail (with bus terminator
6ES7972-0CA30-0XA0)
82 mm
Weight 350 g
Module-Specific Data
Number of channels 32
Pinout
Technical Data
T
erminal Blocks and Supplementary Terminals – Technical Da
ta