Siemens SIMATIC ET 200PA SMART - Page 214

● CSA C22.2 No. 142 (Process Control Equipment)
● CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
FM approval
Factory Mutual Research (FM) in accordance with
Approval Standard Class Number 3611, 3600, 3810
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
ATEX approval
In accordance with EN 60079-15 (Electrical apparatus for potentially explosive atmospheres;
type of protection "n") and EN 60079-0 (Electrical apparatus for potentially explosive gas
atmospheres - Part 0: General requirements)
,,*([Q$,,77*F
IECEx approval
,(&([
According to IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type of
protection "n") and IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General
requirements)
,(&([
([Q$,,&7[*F
,(&(['(.;
ET 200PA SMART I/O modules
10.8 Standards and approvals
ET 200PA SMART
214 Operating Instructions, 06/2019, A5E34192013-AB