FF
H
in byte 3
If the value FF
H
in byte 3 is given as the master PROFIBUS address, the DP slave is not
configured by the DP master.
8.3.4 Manufacturer ID
Definition
The manufacturer ID contains a code that describes the type of the DP slave.
Manufacturer ID
Table 8-5 Structure of the manufacturer ID (Bytes 4, 5)
Byte 4 Byte 5 Manufacturer ID for
81
H
BB
H
IM 650
Interrupt, error and system messages
8.3 S7 diagnostics
ET 200PA SMART
Operating Instructions, 06/2019, A5E34192013-AB 95
To Next Page
Loading...
