Siemens SIMATIC ET 200PA SMART User Manual

10.9 Approvals for the analog input module 6ES7650-8AE60-xAA0
Safety information
WARNING
Explosion hazard
If the electric circuit is live, the following must be observed:
● Do not disconnect the device in a flammable or combustible atmosphere.
● Do not open the housing in a flammable or combustible atmosphere.
WARNING
Field of application
This device is intended for use only in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2,
Group IIC environments or non-hazardous locations.
WARNING
Ambient conditions
The device may only be used in areas with a pollution degree of not more than 2 according to
IEC 60664-1.
WARNING
Enclosure and cables
The device is intended for installation in an housing / control cabinet. The internal operating
temperature of the enclosure / control cabinet corresponds to the maximum permissible
ambient temperature of the module.
Cables must be used whose maximum permissible operating temperature is at least 30 °C
above the maximum permissible ambient temperature.
ET 200PA SMART I/O modules
10.9 Approvals for the analog input module 6ES7650-8AE60-xAA0
ET 200PA SMART
216 Operating Instructions, 06/2019, A5E34192013-AB

Siemens SIMATIC ET 200PA SMART Specifications

General

Brand	Siemens
Model	SIMATIC ET 200PA SMART
Category	Control Systems
Language	English