Data Blocks/Error Lists
C-6
FM 351 Positioning Module
C79000-G7076-C351-02
Table C-1 Content of the Channel DB
Address DescriptionInitial
Value
Data
Type
Name
Error Bits for Function Switches
42.0 PLOOP_ERR BOOL FALSE 1 = error in “loop traverse in
direction plus” job
42.1 MLOOP_ERR BOOL FALSE 1 = error in “loop traverse in
direction minus” job
42.2 EI_ERR BOOL FALSE 1 = error in “Do not evaluate enable input” job
42.3 EDGE_ERR BOOL FALSE Not used
42.4 MSR_ERR BOOL FALSE Not used
Error Bits for Write Jobs
43.0 MDWR_ERR BOOL FALSE 1 = error in “write machine data” job
43.1 MD_ERR BOOL FALSE 1 = error in “activate machine data” job
43.2 DELDIST_ERR BOOL FALSE 1 = error in “deleted remaining distance” job
43.3 AVALREM_ERR BOOL FALSE 1 = error in “cancel set actual value” job
43.4 TRGL1WR_ERR BOOL FALSE 1 = error in “write incremental dimension table
1” job
43.5 TRGL2WR_ERR BOOL FALSE 1 = error in “write incremental dimension table
2” job
43.6 REFPT_ERR BOOL FALSE 1 = error in “set reference point” job
43.7 AVAL_ERR BOOL FALSE 1 = error in “cancel set actual value” job
44.0 FVAL_ERR BOOL FALSE Not used
44.1 ZOFF_ERR BOOL FALSE Not used
44.2 TRG252_254_ERR BOOL FALSE 1 = error in “write incremental dimension for
incremental dimension number 254” job
44.3 TRG255_ERR BOOL FALSE 1 = error in “write incremental dimension for
incremental dimension number 255” job
44.4 DELDIAG_ERR BOOL FALSE 1 = error in “delete diagnostic buffer” job
To Next Page
Loading...
