Siemens SIMATIC Ident - Page 134

Appendix
A.1 Internal status parameter
Ident profile and Ident blocks, standard function for Ident systems
134 Function Manual, 10/2018, C79000-G8976-C387-04
Further status variables exist in the "IID_HW_CONNECT" variable.
Table A- 2 Status variables in "IID_HW_CONNECT"
Name
Data type
Description
STATUS_IN_WORK BOOL Command is currently being executed
• True = a block or the Ident profile is
accessing this channel/reader.
• False = the channel/reader is not cur-
rently being used.
STATUS_INITIALISATION BOOL Reset display
• True = a reset is active on this read-
er/channel.
• False = no reset is active on this read-
er/channel.
LAST_CMD_INIT BOOL This bit indicates that the last command to
be executed was a reset.
• True = last command was reset
• False = last command was not reset
This bit is reset at the next command start
You will find the status variables on the following path: "IID_HW_CONNECT
variable/Static/*Name*".