Siemens SIMATIC Ident - Page 36

Setting parameters for blocks
3.4 Programming Ident blocks
Ident profile and Ident blocks, standard function for Ident systems
36 Function Manual, 10/2018, C79000-G8976-C387-04
Note
Number of EPC-IDs
"number_MDS" specifies the number of EPC IDs (1 to 19) transferred with the
"INVENTORY" block. To receive the handle IDs of all transponders locat
ed in the antenna
field, it may be necessary to run the "INVENTORY" block again with ATTRIBUTE "0x82".
Table 3- 14 ATTRIBUTE "0x83", "0x90", "0x91" und "0x92" (data type "IID_INVENT_8x_9x_RF6_D") for RF620R, RF630R
with handle ID
Name
Type
Comment
reserved
BYTE
number MDS
BYTE
Number of MDS
UID
ARRAY[1..29] of
"IID IN I 8BYTE"
UID[1]
"IID_IN_I_8BYTE"
UID
ARRAY[1..8] of BYTE
UID[1]
BYTE
UID[2]
BYTE
UID[3]
BYTE
UID[4]
BYTE
UID[5]
BYTE
UID[6]
BYTE
UID[7]
BYTE
UID[8]
BYTE
UID[2]
"IID_IN_I_8BYTE"
UID[3]
"IID_IN_I_8BYTE"
UID[4]
"IID_IN_I_8BYTE"
UID[5]
"IID_IN_I_8BYTE"
UID[6]
"IID_IN_I_8BYTE"
UID[7]
"IID_IN_I_8BYTE"
UID[8]
"IID_IN_I_8BYTE"
UID[9]
"IID_IN_I_8BYTE"
UID[10]
"IID_IN_I_8BYTE"
UID[11]
"IID_IN_I_8BYTE"
UID[12]
"IID_IN_I_8BYTE"
UID[13]
"IID_IN_I_8BYTE"
UID[14]
"IID_IN_I_8BYTE"
UID[15]
"IID_IN_I_8BYTE"
UID[16]
"IID_IN_I_8BYTE"
UID[17]
"IID_IN_I_8BYTE"
UID[18]
"IID_IN_I_8BYTE"
UID[19]
"IID_IN_I_8BYTE"