Siemens SIMATIC Ident - Page 84

Setting parameters for blocks
3.5 Programming the Ident profile
Ident profile and Ident blocks, standard function for Ident systems
84 Function Manual, 10/2018, C79000-G8976-C387-04
Table 3- 60 INVENTORY
Parameter
Value / description
CMD
0x69
OFFSETBUFFER Offset in the "RXREF" receive buffer
ATTRIBUTES Identifier of the status modes / possible entries:
RF61xR/RF68xR:
• 0x80 ≙ inventory with brief transponder information
• 0x81 ≙ inventory with a lot of transponder information
• 0x86 ≙ Presence mode on
• 0x87 ≙ Presence mode off
RF620R/RF630R:
• 0x82 ≙ read out the next data record
• 0x83 ≙ read handle ID when MOBY_mode ≙ 6 and EPC-ID when
MOBY_mode ≙ 7
• 0x85 ≙ read out handle IDs and EPC-IDs sorted in descending
order according to the mean RSSI value
• 0x91 ≙ read out handle IDs sorted in descending order according
to the maximum RSSI value
• 0x92 ≙ read out handle IDs sorted in descending order according
to read frequency
• 0xA0 ≙ read out first entries from Black List
• 0xA1 ≙ read out further entries from Black List
RF300/MOBY U:
• 0x00 ≙ list of all tags with UID
INVENTORY_DURATION Only for 0x80 and 0x81:
Duration
Period of time or number of inventories or number of "Observed"
events
Example:
• 0x00 ≙ no inventory
• 0x01 ≙ one inventory