Siemens SIMATIC IPC277E

Technical specifications
8.6 BIOS description
SIMATIC IPC277E
Operating Instructions, 11/2019, A5E35783335-AE
133
Power
Wake on LAN
Enabled
USB Port1 Wake Capability
Disabled
USB Port2 Wake Capability
Disabled
USB Port3/4 Wake Capability Disabled
Wake on Touch:
The Wake on Touch function can by activated via the operating system. Hibernate is
not enabled by default in the operating system.
To enable Hibernate under Windows 10, follow these steps:
1. Right
-click on the Windows button.
2. Click on "Command Promp
t (Administrator)".
3. Enter "powercfg
-h on" and then press ENTER.
4. Close the command prompt.
The IPC can now be set to "Hibernate" using the Start menu.
The IPC is powered up again when you touch the touch screen.
Advanced CPU Control
Use XD Capability
Enable
VTX-2
Enabled
AESNI Feature
Enabled
P-states (ACTUAL)
Enabled
Turbo Mode
Auto
C-states
Enabled
Max C-States
C7
Boot
Boot Type
Dual Boot Type
Quick Boot
Enabled
Quiet Boot
Enabled
Network Stack
Disabled
Add Boot Options
Auto
USB Boot
Enabled
EFI Device First
Disabled
Network Stack
Disabled
PXE Boot on Demand
Disabled
PXE Boot Capability
Disabled
Timeout 0
Legacy / Boot Device Priority
Normal Boot Menu
Standard