SIMATIC IPC277E
Operating Instructions, 11/2019, A5E35783335-AE
61
Commissioning the device and device functions
4.1 Notes on commissioning and operation
The surface of the device can reach temperatures of 65 °C. Any unprotected contact may
cause burns.
Avoid direct contact during operation of the device. Touch the device only with appropriate
protective gloves.
Note
Configuring memory cards in the device
Memory cards used in a device need to be
configured on that device. Memory cards
configured on other devices will not boot as the drive parameters will be different.
Notes on operation
Note
During the boot process...
•
Make sure that there are no conductive liquids on the touch screen during startup.
Do
touch the touch screen during startup.
The device automatically calibrates the touch screen during startup.
Requirement
● The device is connected to the power supply.
● The protective conductor is connected.
● The connection cables are plugged in correctly.
● The following hardware is available for initial commissioning:
– One USB keyboard
– One USB mouse
To Next Page
Loading...
Need help?
General
