Installing and connecting the device
3.2 Installing the device
SIMATIC IPC277E
40 Operating Instructions, 11/2019, A5E35783335-AE
IP65 degree of protection
The specified degree of protection cannot be guaranteed if the device is not correctly
installed. Moisture or water could leak in and cause electric shock or destroy the plant.
The degree of protection IP65 is ensured for the front of the device under the following
conditions:
• The mounting cutout was prepared based on the correct dimensions; see chapter
"Preparing the mounting cutout (Page 37)".
• The device was secured with the supplied mounting clamps or with clamps which can
be optionally ordered.
• The mounting seal is undamaged.
See also
Technical specifications (Page 104)
Dimension drawings (Page 96)
To Next Page
Loading...
