Siemens SIMATIC NET SCALANCE W721-1 User Manual

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
131
Description
The page contains the following boxes:
●
SMTP Client
Enable or disable the SMTP client.
●
Sender Email Address
Enter the name of the sender to be included in the e-mail, for example the device name.
This setting applies to all configured SMTP servers.
●
Send Test Mail
Send a test e-mail to check your configuration.
●
SMTP Port
Enter the port via which your SMTP server can be reached.
Factory settings: 25
This setting applies to all configured SMTP servers.
●
SMTP Server IP Address
Enter the IP address or the FQDN name of the SMTP server.
This table contains the following columns:
●
Select
Enable the check box in a row to be deleted.
●
SMTP Server Address
Shows the IP address or the FQDN name of the SMTP server.
●
Receiver Email Address
Enter the e-mail address to which the device sends an e-mail if a fault occurs.

Siemens SIMATIC NET SCALANCE W721-1 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W721-1
Category	Control Unit
Language	English