Siemens SIMATIC NET SCALANCE W721-1 User Manual

Configuring with Web Based Management
5.9 "Security" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
224 Configuration Manual, 11/2014, C79000-G8976-C350-03
Procedure
1. Select the required security settings. Which settings are possible depends on the
"Authentication Type" you have selected.
Authentication Type
Encryption
Cipher
Encryption key source
Open System
disabled
--
--
Open System
enabled
WEP
Default key
Open System
enabled
AES
1)
Default key (128-bit)
Shared Key enabled WEP Default key
WPA (RADIUS)
enabled
Auto/TKIP/AES
RADIUS Server
WPA-PSK enabled Auto/TKIP/AES WPA(2) Pass Phrase
WPA2 (RADIUS)
enabled
Auto/TKIP/AES
RADIUS Server
WPA2-PSK
enabled
Auto/TKIP/AES
WPA(2) Pass Phrase
WPA/WPA2-AutoPSK
enabled
Auto/TKIP/AES
WPA(2) Pass Phrase
WPA/WPA2-Auto
(RADIUS)
enabled Auto/TKIP/AES RADIUS Server
1)
available only with iPCF or iPCF-MC
2. Click the "Set Values" button.
5.9.2.2
AP Communication
Communications options
On this page, you specify the type of communication allowed by the access point.
Note
This tab is available only in access point mode.

Siemens SIMATIC NET SCALANCE W721-1 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W721-1
Category	Control Unit
Language	English