Configuring with Web Based Management
5.5 "System" menu
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
136 Configuration Manual, 11/2014, C79000-G8976-C350-03
●
Enter the IPv4 address that specifies the end of the dynamic IPv4 address band. The
IPv4 address must be within the network address range you configured for "Subnet".
●
Specify for how many seconds the assigned IPv4 address remains valid. Once this period
has elapsed, the device must either request a new IPv4 address or extend the lease time
of the existing IPv4 address.
Note
This tab is available only on the client SCALANCE W722
-1 RJ-45.
On this page you specify which DHCP options the DHCP server supports. The various
DHCP options are defined in RFC 2132.
To Next Page
Loading...
Need help?
General
