Introduction
1.1 Information on the Configuration Manual
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
10 Configuration Manual, 08/2018, C79000-G8976-C267-13
Orientation in the documentation
Apart from the Configuration Manual you are currently reading, the following documentation
is also available from SIMATIC NET on the topic of Industrial Wireless LANs:
● Configuration Manual: SCALANCE W780/W740 Command Line Interface
This document contains the CLI commands that are supported by SCALANCE W700
devices.
● Performance data 802.11abgn PCIe Minicard MPCIE-R1-ABGN-U3
This document contains information about the frequency, modulation, transmit power and
receiver sensitivity of the wireless card.
● SCALANCE W788-x / W748-1 Operating Instructions
This document contains information on installing and connecting up the following
products and their approvals:
– SCALANCE W788-1 RJ-45
– SCALANCE W788-1 M12
– SCALANCE W788-2 RJ-45
– SCALANCE W788-2 M12
– SCALANCE W788-2 M12 EEC
– SCALANCE W748-1 RJ-45
– SCALANCE W748-1 M12
● Operating Instructions SCALANCE W786-x
This document contains information on installing and connecting up the following
products and their approvals:
– SCALANCE W786-1 RJ-45
– SCALANCE W786-2 RJ-45
– SCALANCE W786-2IA RJ-45
– SCALANCE W786-2 SFP
● System Manual Structure of an Industrial Wireless LAN
Apart from the description of the physical basics and a presentation of the main IEEE
standards, this also contains information on data security and a description of the
industrial applications of wireless LAN.
You should read this manual if you want to set up WLAN networks with a more complex
structure (not simply a connection between two devices).
To Next Page
Loading...
Need help?
General
