Description
2.5 Requirements for installation and operation of SCALANCE W devices
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
32 Configuration Manual, 08/2018, C79000-G8976-C267-13
Requirements for installation and operation of SCALANCE W
devices
A PG/PC with network connection must be available in order to configure the SCALANCE W
devices. If no DHCP server is available, a PC on which the Primary Setup Tool (PST) is
installed is necessary for the initial assignment of an IP address to the SCALANCE W
devices. For the other configuration settings, a computer with Telnet or a Web browser is
necessary.
To Next Page
Loading...
