Configuring with Web Based Management
6.7 "Layer 2" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
347
The table has the following columns:
●
Shows the available Ethernet ports.
●
Specify whether the port should block or forward outgoing DCP frames. You have the
following options available:
– Block
No outgoing DCP frames are forwarded via this port. It is nevertheless still possible to
receive via this port.
– Forward
The DCP frames are forwarded via this port.
1. Specify whether the port blocks or forwards the DCP frames.
2. Click the "Set Values" button.
LLDP
Identifying the network topology
LLDP (Link Layer Discovery Protocol) is defined in the IEEE 802.AB standard.
LLDP is a method used to discover the network topology. Network components exchange
information with their neighbor devices using LLDP.
Network components that support LLDP have an LLDP agent. The LLDP agent sends
information about itself and receives information from connected devices at periodic
intervals. The received information is stored in the MIB.
To Next Page
Loading...
Need help?
General
