Configuring with Web Based Management
6.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
398 Configuration Manual, 08/2018, C79000-G8976-C267-13
Management ACL
Description of configuration
On this page, you can increase the security of your device. To specify which station with
which IP address is allowed to access your device, configure the IP address or an entire
address range.
You can select the protocols and the ports of the station with which it is allowed to access
the device. You define the VLAN in which the station may be located. This ensures that only
certain stations within a VLAN have access to the device.
Note
If you enable this function, note the following
A bad configuration on the "Management Access Con
trol List" page can result in you being
unable to access the device. You should therefore configure an access rule that allows
access to the management before you enable the function.
The page contains the following boxes:
●
Enable or disable the function.
unction is disabled, there is unrestricted access to the management of the device.
The configured access rules are only taken into account when the function is enabled.
To Next Page
Loading...
Need help?
General
