Configuring with Web Based Management
6.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
376 Configuration Manual, 08/2018, C79000-G8976-C267-13
1. To create a new security context, click the "Create" button.
2. Select the required security settings. The settings that are possible depend on the
"Authentication Type" you have selected.
When iPCF, iPCF-HT or iPCF-MC mode is enabled, it is not possible to select the
"Authentication Type".
3. Click the "Set Values" button.
AP communication
Communications options
On this WBM page, you specify the type of communication allowed by the access point.
Note
This WBM page is only av
ailable in access point mode.
To Next Page
Loading...
Need help?
General
