Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
223
●
Specify whether or not the internal IPv4 address of the device will be used.
●
Enter the DHCP parameter that is transferred to the DHCP client. The content depends
on the DHCP option.
– DHCP option 67 (boot file name)
Enter the name of the boot file in the string format.
– DHCP options 3 (Router) and 6 (DNS):
Enter the DHCP parameter as an IPv4 address, e.g. 192.168.100.2. With DHCP
option 6, you can specify several IPv4 addresses separated by commas.
– DHCP option 12 (host name):
Enter the host name in the string format.
– DHCP option 66 (TFTP Server):
Enter the TFTP server as an IPv4 address, e.g. 192.168.100.2 or the FQDN name.
– All other DHCP options
Enter the DHCP parameter in hexadecimal, e.g. the IPv4 address 192.168.100.2
corresponds to "C0A86402".
On this page you specify that devices with a certain MAC address are assigned to the
selected IPv4 address.
To Next Page
Loading...
Need help?
General
