EasyManuals Logo

Siemens SIMATIC NET SCALANCE W780 Series User Manual

Siemens SIMATIC NET SCALANCE W780 Series
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background image
Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
186 Configuration Manual, 08/2018, C79000-G8976-C267-13
6.5.3
Agent IPv4
Configuration of the IP addresses
On this WBM page, you configure the IPv4 address for the device.
Description
The page contains the following boxes:
IP Assgn. Method
Shows how the IPv4 address is assigned.
Static
The IPv4 address is static. You enter the IP settings in the input boxes "IP Address"
and "Subnet Mask".
Dynamic (DHCP)
The device obtains a dynamic IPv4 address from a DHCP server.
IP Address
Enter the IPv4 address of the device.
After clicking the "Set Values" button, this IPv4 address is also displayed in the address
bar of the Web browser. If this does not take place automatically, you will need to enter
the IPv4 address in the address bar of the Web browser manually.
Subnet Mask
Enter the subnet mask of the device.
Default Gateway
Enter the IPv4 address of the default gateway to be able to communicate with devices in
another subnet, for example diagnostics stations, e-mail server.
Agent VLAN ID
Select the VLAN ID from the drop-down list. The drop-down list is available only if the
"Base Bridge Mode" parameter is set to "802.1 Q VLAN Bridge". You configure the

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC NET SCALANCE W780 Series and is the answer not in the manual?

Siemens SIMATIC NET SCALANCE W780 Series Specifications

General IconGeneral
BrandSiemens
ModelSIMATIC NET SCALANCE W780 Series
CategoryWireless Access Point
LanguageEnglish

Related product manuals