Siemens SIMATIC NET SCALANCE W780 Series User Manual

Configuring with Web Based Management
6.4 "Information" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
140 Configuration Manual, 08/2018, C79000-G8976-C267-13
Description
This table contains the following columns:
●
VLAN ID
Shows the VLAN ID of the node.
Note
This column appears in the table only if a VLAN is configured.
●
MAC Address
Shows the MAC address of the node.
●
State
Shows the status of each address entry:
– Learnt
The specified address was learned by receiving a frame from this node and will be
deleted when the aging time expires if no further packets are received from this node.
– Invalid
These values are not evaluated.
●
Port
Shows the port via which the node with the specified address can be reached. Frames
received by the device whose destination address matches this address will be forwarded
to this port.
6.4.10
IPv6 routing
Introduction
This page shows the IPv6 routes currently being used.
Description
The table has the following columns:
●
Destination Network
Shows the destination address of this route.
●
Prefix Length
Shows the prefix length of this route.

Siemens SIMATIC NET SCALANCE W780 Series Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W780 Series
Category	Wireless Access Point
Language	English