Siemens SIMATIC NET SCALANCE W780 Series User Manual

Configuring with Web Based Management
6.6 "Interfaces" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
281
Description
The table has the following columns:
●
Connector
Shows the name of the relevant antenna connector.
●
Antenna Type
Select the type of external antenna connected to the device. If the type of your external
antenna is not available, select the entry "User defined".
If you terminate an antenna connection using a 50 Ω terminating resistor, select the entry
"Not used (Connect 50 Ohm Termination)".
●
Antenna Gain
If you select the "User defined" entry for the "Antenna Type", enter the antenna gain
manually in the "dBi" unit.
–
Antenna Gain 2.4 GHz [dBi]
Here, enter the antenna gain the antenna has in the 2.4 GHz frequency band.
–
Antenna Gain 5 GHz [dBi]
Here, enter the antenna gain the antenna has in the 5 GHz
frequency band.
●
Cable Length [m]
Enter the length of the flexible antenna connecting cable in meters between the device
and the external antenna.

Siemens SIMATIC NET SCALANCE W780 Series Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W780 Series
Category	Wireless Access Point
Language	English