Siemens SIMATIC NET SCALANCE W780 Series

Configuring with Web Based Management
6.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
379
Description
The page contains the following boxes:
●
Reauthentication Mode
Specify who sets the time after which the clients are forced to reauthenticate.
– - (disabled)
Reauthentication mode is disabled.
– Server
Enables time management on the server.
– Local
Enables local time management. In "Reauthentication Interval", specify the time of
validity.
●
Reauthentication Interval [s]
If time management is local, enter the period of validity of the authentication in seconds.
The minimum time is 1 minute (enter 60), the maximum time is 12 hours (enter 43200).
The default is one hour (3,600 seconds).
The table has the following columns:
●
Server IP Address
Here, enter the IP address or the FQDN name of the RADIUS server.
●
Server Port
Here, enter the input port on the RADIUS server.
●
Shared Secret
Enter the password of the RADIUS server.
For the password, ASCII code 0x20 to 0x7e is used.
●
Shared Secret Conf
Confirm the password.
●
Max. Retransmissions
Enter the maximum number of connection attempts.
●
Primary Server
Specify whether or not this server is the primary server.
– Yes: Primary server
– No: Backup server.
●
State
With this check box, you can enable or disable the RADIUS server
Procedure
Entering a new server