Siemens SIMATIC PN/BACnet LINK - Introduction; Preface

PN/BACnet LINK
Operating Instructions, 10/2017, A5E39895543-AA
7
Introduction
1
1.1
Preface
Purpose of this documentation
These operating instructions contain all the information required for configuring, installing,
commissioning and operating the PN/BACnet LINK.
These operating instructions are intended for qualified personnel in the following target
groups:
● Commissioning engineers
● Operating and service personnel
● System integrator
Knowledge required
The following knowledge is required in order to understand the operating instructions:
● Knowledge of programming a SIMATIC S7 controller
● Knowledge in the application of the TIA configuration environment
● Knowledge of working with the PROFINET fieldbus
● Sound knowledge of the BACnet/IP communication protocol
● General knowledge in the field of automation technology
● General knowledge of communication networks
Trademarks
SIMATIC
®
is a registered trademark of Siemens AG.
History
Edition
Remarks
10/2017 First edition