Configuring with the WBM
7.3 The menu items of the WBM
SIMATIC RF650R/RF680R/RF685R
102 Configuration Manual, 03/2018, C79000-G8976-C386-06
The "User management" menu item
To be able to work with the user management function you first need to enable it. To do this,
click the "Enable user management" button and confirm with "OK". The user management
requires a secure connection using HTTPS. Change the connection and log in with an
administrator login.
Figure 7-23 The "User management" menu item; "User management on / off"
Note
First login to WBM via HTTPS
The RF650R, RF680R and RF685R readers ship with the following user profile pre
-installed
User name: admin
Password: admin
Using the "admin" user profile, you can create new user profiles and delete existing profiles.
Security recommendation: Enable user management
After starting the WBM the first time, no user management is enabled. To make sure that
no unauthorized persons can access the reader settings, we recommend that you enable
the user management and create new user profiles after the first login and delete the
preinstalled profile.
To Next Page
Loading...
